Mipa Guide Coat Aerosol 400ML Black Spray – Perfect for Bodywork

Intended use Mipa Kontroll-Spray schwarz is a black guide coat that is used to make irregularities visible when sanding putty and filler surfaces. It reveals any imperfections in the surface, as it blackens the remaining slow spots during flatting that have been caused by irregularities or pitting. Once the entire guide coat has been removed, you can be assured that the remaining filler or putty surface is smooth, absolutely flat and free from imperfections. Processing instructions Substrates Putty and filler surfaces Pre-treatment / cleansing Pre-clean with Mipa Silikonentferner. Please refer to the section "Substrate preparation" for detailed information. Characteristics Fast drying Effective product for detecting unevenness on putty and filler surfaces Very easy to sand Colour / Gloss level black / matt Preparation Before use, shake can vigorously for 1 - 2 minutes! Application Spray to test - Spray distance approx. 20 - 30 cm Apply 1 thin, even, not opaque coat! Flash-off time - After use After use, turn can upside down and spray until the valve is clean, this prevents the valve from clogging up. Mipa Kontroll-Spray Item no. 21210 0000 Technical data sheet page 2 / 2 Version: en 0122 This technical data sheet is supplied for informational purposes only! According to our information, all data and recommendations correspond to the state of art and are based on years of experience in manufacturing our products. They do not exempt the user from his obligation to verify professionally, on his own responsibility, the suitability of our products to the intended purpose under prevailing conditions. Safety data sheets and warnings on packaging must be observed. We reserve the right to modify and to complete the information content at any time, without prior notice or obligation to update. MIPA SE · Am Oberen Moos 1 · D-84051 Essenbach · Tel.: +49(0)87 03/922-0 · Fax: +49(0)87 03/922-100 · [email removed by eBay] · www.mipa-paints.com Drying time at 20 °C Sandable after approx. 5 - 10 min Processing conditions From +10 °C and up to 80 % relative humidity. Ensure adequate air ventilation. Storage Can be stored for 2 years in cool and dry places. VOC-regulation EU limit value for the product (cat. B/e): 840 g/l This product contains max. 720 g/l of VOC. Safety information See safety data sheet