MIPA EP EPOXY PRIMER Grundierfiller 2K GREY 1L + EP HARDENER E10 + EP THINNER

Mipa EP-Grundierfiller is a chromate-free 2K primer filler for an economic car and large vehicle coating. The product combines the properties of filler and adhesion primer.

The high corrosion protection and the very good adhesion also on non-ferrous metals make this product perfectly suitable for composite substrates. Very good filling capacity and adherence to steel, aluminium, zinced steel and GRP.

Recoatable with polyester-based body fillers after forced drying (30 minutes/ 60-80°C) for a dry film thickness up to max. 120 μm.

PRODUCT BENEFITS

• High protection against corrosion
• Resistance to weathering
• Chromate free
• Short drying time
• Very good resistance to chemical and mechanical strain 
• Shock and scratch-resistant

MIPA 2K-hardener for significantly faster drying of Mipa 2K-epoxid resin primer-surfacer Mipa EP-Grundierfiller. It is especially suitable as EP-hardener for recoating with Mipa Polyesterspachel and by application as wet-on-wet filler.

MIPA EP Thinner is a high quality 2-component epoxy thinner used with epoxy primer MIPA EP-Grundierfiller.

You can use the thinner to dilute the epoxy primer to the desired thickness / viscosity. 

By diluting the 2-component EP-Grundierfiller, you can spray the epoxy primer more easily. Therefore, the atomization of the primer is considerably better with a tighter end result.